Elation E Spot III handleiding
Handleiding
Je bekijkt pagina 18 van 28
18
EDIT PROGRAM – Record Controller – Working With Built In Programs [continued]
3. Program Selection for Auto Pro Part
• Select “Edit Program”.
• Press ENTER to confirm.
• Select “Select Programs”.
• Press ENTER to confirm.
• Select “Auto Pro Part 1”, “Auto Pro Part 2” or “Auto Pro Part 3”, and select which
Secondary program is to be sent. Selection “Part 1” means, that the Secondary
unit runs the same program as the Primary units.
• Press ENTER to confirm.
• Press MODE/ESC in order to return to the main menu.
4. Program Selection for Edit Program
• Select “Edit Program”.
• Press ENTER to confirm.
• Select “Edit Program”.
• Press ENTER to confirm.
• Select the desired program. With this function you can edit specific scenes into a
specific program.
• Press ENTER to confirm.
• Press MODE/ESC in order to return to the main menu.
5. Automatic Scene Recording
• Select “Edit Program”.
• Press ENTER to confirm.
• Select “Edit Scenes”.
• Select desired scene numbers. A maximum of 250 scenes can be programmed.
• Press ENTER to confirm.
• Press MODE/ESC in order to return to the main menu.
Bekijk gratis de handleiding van Elation E Spot III, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | E Spot III |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4388 MB |
