Elation ACL 360 BAR handleiding
Handleiding
Je bekijkt pagina 28 van 34
www.elationlighting.com
28 ACL 360 BAR™ User Manual
E RROR CODES
When power is applied, the unit will automatically enter a “Motor Reset” mode,
which brings all the internal motors to a home position. If there is an internal problem
with one or more of the motors, an error code (see below) will flash on the control
display.
ELATION© ACL 360 BAR™
E R R O R C O D E S
Specifications and features are subject to change without any prior written notice.
ERROR CODE
DESCRIPTION
TILT Er
The TILT movement is not located in the default position after the reset.
This message will appear after a fixture reset if the magnetic-indexing circuit
malfunctions (sensor failed or magnet is missing) or there is a motor failure
(defective motor or defective motor IC drive on main PCB). This error may
also be displayed if the head was blocked during a reset function
PAN Er
The PAN movement is not located in the default position after the reset.
This message will appear after a fixture reset if the magnetic-indexing circuit
malfunctions (sensor failed or magnet is missing) or there is a motor failure
(defective motor or a defective motor IC drive on the main PCB). This error
may also be displayed if the head/yoke was blocked during a reset function.
Bekijk gratis de handleiding van Elation ACL 360 BAR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | ACL 360 BAR |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 5231 MB |
