Elation 4CAST DMX BRIDGE handleiding
Handleiding
Je bekijkt pagina 20 van 30
www.elationlighting.com 20
Recall Snapshot
Recalling a snapshot is like saving, select the number from 1-4 then press ENTER.
If DMX-512 frames are being received over the network, they will overwrite any snapshot.
The green LED flashes when DMX-512 frames are being received.
Default Snapshot
Select one of the four saved snapshots (1-4) to be the default settings when the 4Cast DMX
Bridge is powered on. If there are no incoming Art-Net or sACN data packets, the 4Cast
DMX Bridge will show the default scene. Any incoming data packets will overwrite this, so it
is only useful when no controller is used, and some kind of output is desired on power-up.
Erase All Memory
Erase all the memory of the 4Cast DMX Bridge returning everything to the default settings.
Hold down the UP button for 5 seconds until “Reset to erase” message is displayed. Finally
reset the 4Cast DMX Bridge for this change to take effect.
!
When making this setting change, a system reset is required.
Recall'snapshot'
1'press'enter'
Default'snapshot'
none'
Erase'all'memory'
hold'^'5'sec.'
Default'snapshot' '
1'
Bekijk gratis de handleiding van Elation 4CAST DMX BRIDGE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | 4CAST DMX BRIDGE |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 3612 MB |
