Ekko EP20E handleiding
Handleiding
Je bekijkt pagina 17 van 23
- 17 -
- 17 -
Routine Maintenance (Before every shift)
4.2.1Check the liquid level of electrolyte in the accumulator.
The liquid level will be higher when being recharged.
4.2.2 Check every pole, every cable and their covers.
4.2.3 Check if the accumulator box is secured.
4.2.4 Check the stacker for oil leakage.
4.2.5 Check the chain, rollers, fork, oil pipes and horn.
4.2.6 Check the brake.
4.2.7 Check the wear and tear of drive wheels and loading wheels.
4.3 Professional Maintenance Manual
It is very important for safe operation of the stacker to perform overall professional
maintenance. Failure in performing maintenance according to specified interval may
cause malfunction of the stacker, and potential risk to human and equipment.
Maintenance periods listed in this manual apply to single shift a day under normal
operation conditions. If using in dusty environment, the ambient temperature varies
remarkably or in multi-shift situation, the maintenance period has to be shortened.
Maintain the stacker according to following maintenance list. Maintenance periods
are as follows:
W1 = Every 50 work hours, but at least once a week.
M3 = Every 500 work hours, but at least once every three months
M6 = Every 1000 work hours, but at least once every six months
M12 = Every 2000 work hours, but at least once every 12 months
Additional operations should be performed in trial run period:
(In initial 50 – 100 working hours or after two months)
— Check the nuts on the wheels, and tighten them if necessary.
— Check the hydraulic components for leakage, and tighten them if necessary.
—Replace the hydraulic filter.
维护时间间隔●
W
A
B
C
Braking
1.1
Check the air gap of electromagnetic brake
●
Electric
System
2.1
Check switch operation, display the function of the equipment
and components
●
2.2
Check the alarm system and safety device
●
2.3
Check whether there is any damage on the cable and terminal
is rigid
●
2.4
Check the function of the micro switch Settings
●
2.5
Check the controller and EPS controller
●
2.6
Fixed cable and motor
●
Energy
Supply
3.1
By observing the battery
●
3.2
Visual inspection battery charging plugs
●
3.3
Check whether the battery cable connection fastening, if
necessary, with oil daub electrode
●
Traveling
System
4.1
Check if have gearbox abnormal sound
●
4.2
Check the travel agency, and the oil, check the reset function of
operating handles
●
4.3
Check the drive wheels and bearing wheel for wear and
damage
●
4.4
Check the wheel bearing and fixed
●
Massive
Structure
5.1
Check whether the framework has damaged
●
5.2
Check whether the sign is complete
●
5.3
Check the door frame fixed situation
●
The
hydraulic
system
6.1
Check the function of the hydraulic system
●
6.2
Check the hoses, pipes and interface whether fastening, sealing
and presence of damage
●
6.3
Check whether the damaged piston and cylinder，sealed and
fixed
●
6.4
Check the load chain Settings，
●
6.5
Visual inspection door frame and check on the surface of the
roller of roller wear
●
6.6
Check the goods fork teeth and load parts for wear and
damage
●
6.7
Check the tank oil level
●
6.8
Update the hydraulic oil
●
Bekijk gratis de handleiding van Ekko EP20E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ekko |
| Model | EP20E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2994 MB |
