Ekko EK07S handleiding
Handleiding
Je bekijkt pagina 21 van 22
- 20 -
The goods can't drop
The dirty oil blocking control valve
Check the hydraulic oil and cleaning
control valve, and if necessary
change, the hydraulic oil.
Lowering solenoid valve no open or
damaged
Check the lowering solenoid valve or
change
Can't stop rising
Lifting micro switch damaged
Cut the power，change lifting micro
switch
A direction moving
Micro switch and cable jumper
contact is not good
Check the micro switch and
connect jumper witch on the control
handle
The stacker move
slowing
Battery power shortage or
homologous cable jumper contact is
not good
Check the battery power led and
homologous cable jumper contact.
The car suddenly
started
Controller is damaged.
Change the controller
The handle which control the
forward or back is no reset.
Repair or change
If above steps still cannot solve problems, please contact after-sales service
department of the manufacturer and have the problems solved by specially
trained technicians.
5.2 Preparation before repair
To prevent possible accidents during maintenance and repair work, following
preparations must be done:
— Park the stacker safely.
— Press the emergency stop switch and disconnect the connectors on accumulator.
5.3Check hydraulic oil level
— Get the stacker ready for maintenance or repairing.
— Open the cover of electric unit.
— Check hydraulic oil level in oil tank.
Check the hydraulic oil level only after the fork and main frame are lowered to their
lowest position.
5.4 Use Preparation after maintenance or repairing
Use the stacker only after following operations have been completed.
— Clean the stacker.
— Check the brake.
Bekijk gratis de handleiding van Ekko EK07S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ekko |
| Model | EK07S |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2446 MB |
