Ekko EK07S handleiding
Handleiding
Je bekijkt pagina 20 van 22
- 19 -
4.4.8 Charging
The Electric stackers is supplied with a special charger for recharging.
A:Read the instruction manual carefully before recharging.
B:The batteries should be recharged in well-ventilated areas. Make sure no metal
objects placed on the accumulator. Check all cables connection and connectors
for obvious defects. Observe strictly all safety instructions, e.g. replenishment of
the accumulator and preparation for recharging.
C:Hydrogen will be precipitated in the charging process. So the accumulator
room should be well-ventilated, and the hydrogen content shall be strictly
controlled to ensure safety.
D:For the safety of the cooperation, the stacker should be added protective cover
before using.
5、Repair Manual
5.1 Fault Diagnosis
fault
cause
Processing method
The vehicle can't
move
The battery connector is not
connected
Check the battery connector ，
connected if necessary
Electric lock switch on “0”
Electric lock switch turn right
Emergency Stop Switch not open
Open the Emergency stop switch
Battery power runs out
Check the battery charge，If it is
necessary to recharge
The stacker being charge
Interrupt charging process
The fuse is damaged
Check the fuse
The goods cannot
ascend
The stacker no running
According to the "vehicle cannot
move" listed in the fault processing
method of operation
Less hydraulic oil
Check the hydraulic oil
The fuse is damaged
Check the fuse
Over weight
Note the load capacity
the micro switch of lifting contact is
not good or damaged
Check the fuse
Bekijk gratis de handleiding van Ekko EK07S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ekko |
| Model | EK07S |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2446 MB |
