Ekko EB20E handleiding
Handleiding
Je bekijkt pagina 15 van 25
14
9.2 Daily Maintenance
9.2.1 Check every pole, every cable and their covers.
9.2.2Check if the accumulator box is secured.
9.2.3 Check the stacker for oil leakage.
9.2.4 Check the chain, rollers, fork, oil pipes and horn.
9.2.5Check the brake.
9.2.6 Check the wear and tear of drive wheels and loading wheels.
9.3 Professional Maintenance Manual
It is very important for safe operation of the truck to perform overall professional maintenance. Failure in
performing maintenance according to specified interval may cause malfunction of the truck, and potential risk to
human and equipment.
Maintenance periods listed in this manual apply to single shift a day under normal operation conditions. If using
in dusty environment, the ambient temperature varies remarkably or in multi-shift situation, the maintenance
period has to be shortened.
Maintain the truck according to following maintenance list. Maintenance periods are as follows:
W1 = Every 50 work hours, but at least once a week.
M3 = Every 500 work hours, but at least once every three months
M6 = Every 1000 work hours, but at least once every six months
M12 = Every 2000 work hours, but at least once every 12 months
Additional operations should be performed in trial run period:
(In initial 50 – 100 working hours or after two months)
— Check the nuts on the wheels, and tighten them if necessary.
— Check the hydraulic components for leakage, and tighten them if necessary.
—Replace the hydraulic filter.
Bekijk gratis de handleiding van Ekko EB20E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ekko |
| Model | EB20E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3725 MB |
