Ekko EB20E handleiding
Handleiding
Je bekijkt pagina 14 van 25
13
forward to pile top stop. Heap controls control lever slowly, once handling stacked drags the weight, the goods fork
to the hollow position, from the weight of the goods fork, make sure barrier-free backward position, can retreat.
After goods fork out weight reduce goods fork, door frame round of the reentry after handling operation.
9.Maintenance
The parts on the vehicle, especially safety devices, shall not be modified without permission, and the driving speed of
the vehicle shall not be changed. All parts supplied by the original manufacturer are subject to strict quality
inspection. To ensure the safety and reliability of the vehicle, please use the original accessories. Replacement parts,
including all oil, must be collected and processed in accordance with local environmental and health laws and
regulations.
9.1Safety procedures for repair and maintenance
Maintenance technician: The maintenance and service should only be performed by special personnel trained by
the manufacturer. After the technician sent by after-sales department of the manufacturer completed maintenance
and servicing work, they should sign on the service log.
Cleaning Operation: Flammable liquid cannot be used for cleaning the stacker. Before cleaning, take safety
precautions to prevent electric sparks (e.g. sparks caused by short circuit). When operating the accumulator,
connectors on it must be disconnected. Use soft air suction or compressed air, non-conductive and anti-static
brushes to clean electric and electronic components.
Operation of Electric System: Operation on the electric system should only be performed by specially trained
personnel. Before performing any operation on the electric system, precautions must be made to prevent electric
shock. When operating the accumulator, connectors on it must be disconnected.
Installation: When repairing or replacing hydraulic components, electric and electronic components, make sure to
install them back to their original positions.
Wheels: Quality of the wheels has significant effect on stability and driving performance of the stacker. Modification
on wheels can be performed only with the approval from the manufacturer. When replacing wheels, ensure that the
stacker is levelled as delivery state (wheels must be replaced in pairs, i.e. replace right wheel together with left one).
Lifting chain and rollers: Chain and rollers will be worn quickly without good lubrication. Perform periodic
lubrication according to following maintenance table. Shorten the lubrication period under adverse operation
conditions (such as in dusty and hot environment).
Hydraulic oil pipe: The oil pipe must be changed every 6 years. When change the hydraulic assembled parts, the oil
pipe should be also changed.
Bekijk gratis de handleiding van Ekko EB20E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ekko |
| Model | EB20E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3725 MB |
