Eizo DuraVision SGX0031 handleiding
Handleiding
Je bekijkt pagina 39 van 67
Managing Cameras | 5
39
5.2.6 DirectUri
Note
• To receive an MPEG2-TS stream with RTP, select "Comm. Method" or "RTP over UDP" in "RTP
over RTSP."
• To receive an MPEG2-TS stream over UDP, check the following points.
– Specify the port number (1024 to 65535) that receives the stream in "Port" and select
"MPEG2-TS over UDP" in "Comm. Method."
– You should make stream transmission settings for this product from the transmitter in
advance.
– For non-multicast communication, leave the IP address blank.
IP Address
Settings: "0.0.0.1" – "255.255.255.254"
Enter the IP address of the camera.
Click "Ping" to perform a connection test on the camera.
Port
Settings: "1" – "65535"
Enter the port number of the camera.
Typical port numbers are "554" when "Protocol" is "DirectUri," and "URI" is an RTSP stream
URI.
Username
Settings: Alphanumeric characters and symbols (up to 32 characters)
Enter the username of the camera. A user with administrative privileges is required.
Password
Settings: Alphanumeric characters and symbols (up to 32 characters)
Enter the password for the camera.
URI
Settings: Alphanumeric characters (up to 1023 characters)
Enter an RTSP stream URI (starting with rtsp://, http://, or https://) or an RTP stream URI
(starting with rtp://).
Transmission Mode
Settings: "Unicast" / "Multicast" / "Source-Specific Multicast"
Select the transmission mode.
Comm. Method
Settings: "RTP over UDP" / "RTP over RTSP" / "MPEG2-TS over UDP" / "RTSP over
HTTP" / "RTSP over HTTPS"
Select the communication method for camera video images.
Bekijk gratis de handleiding van Eizo DuraVision SGX0031, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eizo |
| Model | DuraVision SGX0031 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4927 MB |
