Eizo DuraVision SGX0031 handleiding
Handleiding
Je bekijkt pagina 12 van 67
3 | Configuring the Streaming Gateway Function
12
3.2 Configuring Streaming Settings
1. Select "Streaming Gateway" > "Streaming settings."
2. Click Edit (
) for the camera you want to configure streaming settings.
3. Set each item.
– "Camera Name" (Camera Name [}12])
– "Encode" (Encode [}12])
– "Protocol" (Protocol [}12])
– "IP Setting Method" (IP Setting Method [}12])
– "Port" (Port [}12])
– "MPEG2-TS" (MPEG2-TS [}13])
4. Click "Apply."
Camera Name
When "Streaming mode" is set to "Merge mode" or "Merge mode (low latency)," "Live_View"
is displayed.
When "Streaming mode" is set to "Relay mode," the same camera name as on the "Camera
Registration" screen is displayed.
Encode
Settings: "Encoding Setting 1" / "Encoding Setting 2"
Select the encoding settings. For information on encoding settings, refer 3.3 Configuring
Encoding Settings [}13].
Can be set only if "Streaming mode" is "Merge mode" or "Merge mode (low latency)."
Protocol
Settings: "RTSP" / "SRT" / "RTP"
Select the protocol.
• "RTSP"
A protocol widely used in surveillance cameras, etc. In most situations select this option.
• "SRT"
Use when security or line quality is a priority. A license may be required when receiving
on an IP decoding box/IP monitor, etc.
• "RTP"
Delivers an RTP stream to the specified IP address and port.
IP Setting Method
Settings: "0.0.0.1" – "255.255.255.254" (excluding the multicast range "224.0.0.0" to
"239.255.255.255")
Set the IP address.
Can be set if "Protocol" is "RTP."
Port
Settings: "1024" – "65535"
Set the port number.
Can bet set if "Protocol" is "SRT" or "RTP."
Bekijk gratis de handleiding van Eizo DuraVision SGX0031, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eizo |
| Model | DuraVision SGX0031 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4927 MB |
