Handleiding
Je bekijkt pagina 31 van 92
13
English
Troubleshooting
●
No picture
Problem Possible cause and remedy
1. No picture
• Power indicator does not light.
• Check whether the power cord is connected properly.
• Press
.
• If the problem persists, turn o the power, and then turn
it on again a few minutes later.
• Power indicator is lighting blue. • Increase “Brightness” and / or “Gain” in the Setting menu.
• Power indicator is lighting orange. • Switch the input signal with
.
• Move the mouse or press any key on the keyboard.
• Check whether the PC is turned on.
• Depending on the PC and graphics board, the input
signal is not detected and the monitor does not recover
from the power saving mode. If the screen is not
displayed even after moving the mouse or pressing any
key on the keyboard, turn the monitor o and on using its
power button. When the screen is displayed, execute the
following procedure. The problem may be improved.
1. Press
to turn o the monitor.
2. Hold down
while pressing to turn on the
monitor.
“x” is displayed on the menu title of “Information” of
the Setting menu.
3. Reboot the PC.
To return to the previous setting, perform steps 1 to 3
again.
2. The message below appears. This message appears when the signal is not input correctly
even when the monitor functions properly.
• The message shows that the input signal is
out of the specied frequency range.
Example:
• Check whether the PC is congured to meet the
resolution and vertical scan frequency requirements of
the monitor (see “Compatible Resolutions”).
• Reboot the PC.
• Select an appropriate setting using the graphics board’s
utility. Refer to the User’s Manual of the graphics board
for details.
Note
• If there is a problem with the image displayed or with the touch panel, refer to the Monitor User’s Manual (on
the CD-ROM).
Bekijk gratis de handleiding van Eizo DuraVision FDX1003, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eizo |
| Model | DuraVision FDX1003 |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 11959 MB |
