Handleiding
Je bekijkt pagina 28 van 92
10
Adjusting the Screen Angle
Hold the left and right edges of the monitor with both hands, and adjust the tilt and swivel of the screen to
the optimum position for working.
Attention
• Be sure that the cables are correctly connected.
Attaching the Optional Arm
An optional arm (or an optional stand) can be attached by removing the stand section. Please refer to our
web site for the corresponding optional arm (or optional stand). www.eizoglobal.com
Attention
• When attaching an arm or stand, follow the instructions of their User’s Manual.
• When using another manufacturer’s arm or stand, conrm the following in advance and select one conforming to the
VESA standard. Use the screws securing the unit and the stand.
- Clearance between the screw holes: 100 mm × 100 mm or 75 mm × 75 mm (for FDX1203 / FDX1203T only)
- Thickness of plate : 2.6mm
- Strong enough to support weight of the monitor unit (except the stand) and attachments such as cables.
• When attaching an arm or stand, the installable orientations and movement range (tilt angle) are as follows:
Orientation
Movement range
(tilt angle)
Up: 90˚
Down: 90˚
• Connect the cables after attaching an arm or stand.
• The monitor and arm or stand are heavy. Dropping them may result in injury or equipment damage.
• Periodically check the tightening of screws.
• If screws are loose, the monitor may detach and cause injury or equipment damage.
Bekijk gratis de handleiding van Eizo DuraVision FDX1003, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eizo |
| Model | DuraVision FDX1003 |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 11959 MB |
