Eizo DuraVision FDS1783T handleiding
Handleiding
Je bekijkt pagina 25 van 48
25
Chapter 3 Touch Screen Properties
Timeout (Sec)
Default setting: None
Available range: “None” / “15” / “30” / “60” seconds
When this is set to anything other than “None”, 4-point or 9-point calibration will time out if no touch
occurs for the specied number of seconds. The system returns to the pre-adjustment state when
you click “OK” after the calibration has timed out, or when the specied timeout time has elapsed.
EEPROM
Default setting: Unchecked (do not use)
Check the “Use EEPROM” option, then click the “Entry” button to save the calibration data to the
memory in the touch panel monitor.
Attention
• Depending on the monitor you are using, you may not be able to use it. In this case, the message will
appear as shown below; this is not a failure.
Bekijk gratis de handleiding van Eizo DuraVision FDS1783T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eizo |
| Model | DuraVision FDS1783T |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4540 MB |
