Eizo DuraVision FDS1783T handleiding

48 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 15 van 48
15
Chapter 2 Setup
2-5. Registering a Conguration File
Register a conguration le and congure the operation mode of the touch panel.
Attention
You must register a conguration le for each installed touch panel driver.
In the default setting, no conguration le is registered. When no conguration le is registered, the “Touch.mfd”
le will be set.
1.
In “Basic Setting” - “Device Select, select the touch panel driver for which a
conguration le is to be registered.
2.
In the "Conguration File" tab, select a le according to the input method from
the "Conguration File" pull-down menu.
Touch digitizer mode
(Touch.mfd)
Mouse emulation mode
(Mouse.mfd)
Two or more simultaneous touch points are available.
*1
Only single point touch is available.
Enables the same operations as those of the mouse as well as multi-
touch operations such as image zoom and rotation.
The cursor reacts in the same way
when you operate the mouse.
*2 The allowable number of simultaneous touch points varies depending on the monitor you are using. For
details, see the Users Manual of the monitor.
Note
The “Conguration File” is not registered by default. If the conguration le is not registered, the touch
digitizer mode (“Touch.mfd” le) is selected. When you want to use mouse emulation mode, select the “Mouse.
mfd” le.

Bekijk gratis de handleiding van Eizo DuraVision FDS1783T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkEizo
ModelDuraVision FDS1783T
CategorieNiet gecategoriseerd
TaalNederlands
Grootte4540 MB