Handleiding
Je bekijkt pagina 25 van 49
25
Chapter 6 Troubleshooting
Chapter 6 Troubleshooting
6-1. No picture
Problem Possible cause and remedy
1. No picture
• Power indicator does not light.
• Check whether the power cord is connected properly.
• Turn the main power switch on.
• Press
.
• Turn o the main power, and then turn it on again a few
minutes later.
• Power indicator is lighting blue. • Increase “Brightness”, “Contrast”, or “Gain” in the Setting
menu (see “To perform advanced adjustments” (page
10)).
• Power indicator is lighting orange.
• Switch the input signal with
.
• Move the mouse or press any key on the keyboard.
• Touch the panel surface.
• Check whether the PC is turned on.
• Depending on the PC and graphics board, the input signal
is not detected and the monitor does not recover from
the power saving mode. If the screen is not displayed
even after moving the mouse or pressing any key on the
keyboard, turn the monitor o and on using its power
button. When the screen is displayed, execute the
following procedure. The problem may be improved.
1. Press
to turn o the monitor.
2. Hold down
while pressing to turn on the
monitor.
“x” is displayed on the menu title of “Information”
of the Setting menu (see “7-3. Displaying Monitor
Information” (page 33)).
3. Reboot the PC.
To return to the previous setting, perform steps 1 to
3 again.
• Power indicator is ashing orange. • The device that is connected using DisplayPort have a
problem. Solve the problem, turn o the monitor, and then
turn it on again. Refer to the User’s Manual of the output
device for further details.
Bekijk gratis de handleiding van Eizo DuraVision FDF2121WT-A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eizo |
| Model | DuraVision FDF2121WT-A |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 4795 MB |
