Eizo ColorEdge ColorNavigator 7 Handleiding (99 Pagina's)

Handleiding

13

Chapter 2 Setup

2-4. Warming up the Monitor

The monitor cannot display images accurately right after the monitor is turned on because the brightness

and chromaticity are not stabilized. Before performing adjustments, turn on the power of the monitor and

warm it up.

Attention

• The warming-up time varies depending on the monitor being used. For details on the warming-up time, see the

User's Manual of the monitor.

• SelfCorrection requires a warming-up that takes 60 minutes or more.

1.

Turn on both the monitor and the computer.

2.

Disable the power management function of the computer.

Disable the power management function of the computer so that it does not enter the power-saving

mode while warming up.

Attention

• When the computer enters the power-saving mode, the monitor enters in the state where the power is turned

o󰀨. Therefore, it takes some time for the brightness and chromaticity to re-stabilize once the computer comes

out of the power-saving mode.

3.

Set the display resolution and number of colors.

The monitor should be used at the recommended resolution.

Set the monitor color to 16.7 million (24-bit) or more.

Note

• For details on the recommended monitor resolution, see the User's Manual of your monitor.

Bekijk gratis de handleiding van Eizo ColorEdge ColorNavigator 7, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.