Einhell GP-HC 18/5020 Li T BL handleiding

Niet gecategoriseerd

Einhell

189 pagina's

PDF beschikbaar

Handleiding

Je bekijkt pagina 18 van 189

- 18 -

5. Before starting the equipment

Caution! Do not ﬁ t the battery until the equipment

has been fully assembled and all the settings

have been actuated. Always wear protective

gloves when working on the equipment to protect

yourself against injury. Carefully unpack all parts

and check that they are complete (Fig. 1).

5.1 General assembly

Fig. 2-3: Push the tube onto the handle housing

(2a) and screw it tight with the assembly nut (6).

5.2 Additional handle (Fig. 5)

Foam rubber grip area (F)

5.3 Using the shoulder strap

Warning! Always use a shoulder strap when wor-

king with the tool. Always switch oﬀ the tool before

you release the shoulder strap. Otherwise there is

a risk of injury.

1. Hook the carabiner (Fig. 4/4a/Item A) into the

strap attachment.

2. Slip the shoulder strap (Fig. 7/Item 8) over

your shoulder.

3. Adjust the length of the shoulder strap so that

the strap attachment is at waist level (Fig. 7).

4. The shoulder strap is equipped with a buckle.

Press the hooks together (Fig. 8) if you need

to put the equipment down quickly.

5. To change the strap position on the tool (Fig.

6/Item L) release and adjust the strap attach-

ment on the tube.

5.4. Adjusting the angle of the motor housing

(Fig. 9/10)

Press the lock-oﬀ button (14) and adjust the tilt of

the motor housing.

5.5 Adjusting the telescopic tube (Fig. 11)

1. Undo the telescopic tube lock nuts (10 + 12).

2. Pull out the telescopic tubes (11 + 13) to suit

the required working height.

3. Secure the telescopic tube lock nuts (10 +

12).

5.6 Fitting the hedge trimmer mounting kit to

the motor head (Fig. 12 – 13)

The guard must be slipped over the hedge cutter

blade in order to prevent injuries.

Assembly as shown in Fig. 12/13.

The hedge trimmer mounting kit will lock onto the

motor head and is then secured in place. The lock

button (R) will click into place.

5.7 Removing the hedge trimmer mounting

kit from the motor head (Fig. 12 – 13)

The guard must be slipped over the hedge cutter

blade in order to prevent injuries.

1. Pull the lock button (R) to the left.

2. Undo the assembly nut (6).

5.8 Fitting the battery (Fig. 14 - 15)

Press the side pushlock button (T) of the battery

pack as shown in Fig. 14 and push the battery

pack into the mount provided. When the battery

pack is positioned as in Fig. 15, make sure that

the pushlock button latches in place! To remove

the battery pack, proceed in reverse order.

5.9 Charging the battery (Fig. 15-16)

1. Take the battery pack out of the equipment.

Do this by pressing the pushlock button (T).

2. Check that your mains voltage is the same as

that marked on the rating plate of the battery

charger. Insert the power plug of the charger

(21) into the mains socket outlet. The green

LED will then begin to ﬂ ash.

3. Insert the battery pack (1) into the battery

charger (21).

4. In the section entitled „Charger indicator“ you

will ﬁ nd a table with an explanation of the LED

indicator on the charger.

The battery pack can become a little warm during

the charging. This is normal.

If the battery pack fails to charge, check:

•

whether there is voltage at the socket outlet

•

whether there is good contact at the charging

contacts.

If the battery pack still fails to charge, send

•

the charging unit

•

and the battery pack

to our customer service center.

To ensure that items are properly packaged

and delivered when you send them to us,

please contact our customer service or the

point of sale at which the equipment was

purchased.

When shipping or disposing of batteries and

cordless tools, always ensure that they are

packed individually in plastic bags to prevent

short circuits and ﬁ res.

To ensure that the battery pack provides long ser-

vice, you should take care to recharge it promptly.

You must recharge the battery pack when you

Anl_GP_HH_18_50_Li_T_BL_SPK13.indb 18Anl_GP_HH_18_50_Li_T_BL_SPK13.indb 18 20.11.2024 14:22:2520.11.2024 14:22:25

Bekijk gratis de handleiding van Einhell GP-HC 18/5020 Li T BL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.