Eibenstock PLE 182 handleiding
Handleiding
Je bekijkt pagina 21 van 144
20
Do not use the tool in an environment with danger of explosion.
Do not use the tool standing on a ladder.
Do not drill into asbestos-containing materials.
Do not carry the tool at its cable, and always check the tool, cable and
plug before use. Have damages only repaired by specialists. Insert the
plug into the socket only when the tool switch is off.
Modifications of the tool are prohibited.
Unplug the tool and make sure that the switch is off if the tool is not under
supervision, e.g. during preparation and take-down works, at power
failures, for insertion or mounting accessories.
Unplug the tool if it stops for any reason. So you avoid sudden starts in
unattended condition.
Don’t use the machine if a part of the housing is damaged or in case of
damages on the switch, the cable or plug.
Always lead the mains and extension cables as well as the dedusting
hose from the tool to the back.
Electrical tools have to be inspected visually by a specialist in regular
intervals.
On using the tool, in no case cooling water may seep into the motor or
the electric components.
If water comes out of the drainage hole at the gear neck, stop your work
and have the tool repaired by an authorised service centre.
Perform overhead drilling only with suitable protective appliances (water
catcher).
When performing drilling that requires the use of water, route the
water away from the operator’s work area or use a liquid collection
device. Such precautionary measures keep the operator’s work area dry
and reducethe risk of electrical shock.
When the bit is jammed, stop applying downward pressure and turn
off the tool. Investigate and take corrective actions to eliminate the
cause of the bit jamming.
When restarting a diamond drill in the workpiece check that the bit
rotates freely before starting. If the bit is jammed, it may not start, may
overload the tool, or may cause the diamond drill to release from the
workpiece.
Always wait until the machine has come to a complete stop before
placing it down. The tool insert can jam and lead to loss of control over
the power tool.
Keep the handles dry, clean and free of oil and grease.
Do not touch rotating parts.
Persons under 16 years are not allowed to use the tool.
During use, the user and other persons standing nearby have to wear
suitable goggles, helmets, ear protectors, dust mask, protective cloves
and boots.
During manual operation, always hold the tool with both hands and
be fall-safe. Consider the tool’s reaction torque in case of blocking.
Bekijk gratis de handleiding van Eibenstock PLE 182, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eibenstock |
| Model | PLE 182 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 19223 MB |
