Eibenstock PLE 182 handleiding
Handleiding
Je bekijkt pagina 20 van 144
19
Supply
Diamond core drill with PRCD protective switch integrated in the cable, wet-
type connector with ball valve and GARDENA connector, dust extraction for
deduster connection (diameter 35 mm), 2 open-end wrench (SW32 and
SW41) and instruction manual in transport case.
Application for Indented Purpose
The diamond core drill PLD 182.1 NT is indented only for professional use
and may be used only by instructed personnel. It may be used either with or
without a suitable diamond drill rig. With an appropriate drill bit, the tool can
be used for wet cutting of concrete and stone and dry cutting of bricks, sand-
lime bricks and pore concrete.
For wet drilling jobs with diameters above 70 mm and drilling in the
1
st
gear, it is a must to use a suitable drill rig.
Drilling in the 1
st
gear without drill rig is prohibited!
On careless use, counter torques may cause danger to the user!
Safety Instructions
Safe use of the tool is only possible if the user had studied
the instruction manual and safety instructions completely
and is strictly following the instructions contained therein.
Additionally, the general safety instructions of the leaflet
supplied with the tool must be observed. Prior to the first
use, the user should absolve a practical training. Save all
warnings and instructions for future reference.
If the mains cable gets damaged or cut during the use, do not
touch it, but instantly pull the plug out of the socket. Never use
the tool with damaged mains cable.
Prior to drilling in walls and ceilings, check them for hidden
cables, gas and water pipes and other media.
Check the working area, e.g. using a metal detector.
Prior to the start of your work, consult a statics specialist to
determine the exact drilling position.
If drilling through ceilings, secure the place below, because the
drill core may fall downward.
The tool must neither be wet nor used in humid environment.
Hold power tool by insulated gripping surfaces, when performing
an operation where the cutting accessory may contact hidden
wiring or its own cord. Cutting accessory contacting a “live” wire may
make exposed metal parts of the power tool “live” and could give the
operator an electric shock.
Bekijk gratis de handleiding van Eibenstock PLE 182, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eibenstock |
| Model | PLE 182 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 19223 MB |
