Eibenstock FloorMix 2300 handleiding
Handleiding
Je bekijkt pagina 20 van 96
20
Before starting the machine check the correspondence between voltage
and frequency according to the data mentioned on the identification plate.
Voltage differences from + 6 % and – 10 % are allowed.
The FloorMix 2300 is made in protection class I.
Only use extension cables with a sufficient cross-section. A cross-section
(min. 2.5 mm²) which is too small could lead to an excessive power loss
and to an overheating of motor and cable.
Use
Preselection of the speed:
The speed can be set in four stages.
This is done with the help of two gear stages and two electrically-switchable
motor stages.
Electrical Connection
Stage 1 = 70 rpm
Gear stage 1 / Motor stage 1
Stage 2 = 130 rpm
Gear stage 1 / Motor stage 2
Stage 3 = 160 rpm
Gear stage 2 / Motor stage 1
Stage 4 = 280 rpm
Gear stage 2 / Motor stage 2
Only change the gear stage when the
machine has come to a complete standstill!
Bekijk gratis de handleiding van Eibenstock FloorMix 2300, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eibenstock |
| Model | FloorMix 2300 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17321 MB |
