Eibenstock EPO 200-3 R NT handleiding
Handleiding
Je bekijkt pagina 15 van 64
15
Safety Instructions
Safe work with the machine is only possible if you read
this operating instruction completely and follow the
instructions contained strictly. Additionally, the general
safety instructions of the leaflet supplied with the tool
must be observed. Prior to the first use, the user should
absolve a practical training. Save all warnings and
instructions for future reference.
If the mains cable gets damaged or cut during the use, do not
touch it, but instantly pull the plug out of the socket. Never use
the tool with damaged mains cable.
The tool must neither be wet nor used in humid environment.
Do not use the tool near explosive materials (petrol, dilution).
Do not work with materials containing asbestos.
Prior to every use, check the tool and its cable and plug. Have
damages only repaired by specialists. Insert the plug into the socket
only when the tool switch is off.
Plug off if it is not under supervision, in case of putting up and stripping
down the machine, in case of voltage drop or when fixing or mounting
an accessory.
When you work outside, the machine has to be used with a fault-current
circuit breaker with max. 30 mA.
Switch the machine off if it stops for whatever reason. You avoid that it
starts suddenly and not under supervision.
Pay attention that the speed indicated on the wheels meets or is higher
than the max. speed indicated on the machine.
Grinding wheels have to be stored and used carefully according to the
instructions of the producer.
Check the accessories before use. Do not use any products which are
broken, cracked or damaged in another way.
Make sure that the tool was mounted properly, and let it run idly in a
safe position for 30 seconds. Stop the tool immediately if you found
considerable vibrations or other defects.
Always lead the mains and extension cable as well as the extraction
hose to the back away from the machine.
Don’t use the machine if a part of the housing is damaged or in case of
damages on the switch, the cable or plug.
Electrical tools have to be inspected visually by a specialist in regular
intervals.
Do not touch rotating parts.
Persons under 16 years are not supposed to use the tool.
Keep the handles dry, clean and free of oil and grease.
Bekijk gratis de handleiding van Eibenstock EPO 200-3 R NT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eibenstock |
| Model | EPO 200-3 R NT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6520 MB |
