Eibenstock DBE 250 R handleiding
Handleiding
Je bekijkt pagina 24 van 256

24
Drilling
Vertical drilling
Switch the PRCD to On.
Open the water supply.
Switch on the motor without the drill bit touching the surface.
Turn the handle to lower the drill bit until it touches the surface.
To ensure that the drill bit is centred precisely, keep the feed low for
the first centimetre of cutting depth.
You can then drill faster. If the drilling speed is too low, this will reduce
performance. If the drilling speed is too high, the diamond segments
will quickly become blunt.
Angular drilling
Remove the screw in the foot plate that locks the column at 90°.
Loosen the two screws at the foot of the column and swivel the column
to the desired angle.
Retighten the two screws.
Drill very slowly at the beginning, as the bit only grips the material with
a fraction of its cutting surface. If you drill too fast or with too much
pressure, the bit can go off course.
If you notice while drilling that the feed rate is becoming very slow, you
have to apply more force and the water from the drill hole is clear and
mixed with metal splinters, you have encountered reinforcing bars.
To cut through the reinforcement without any problems, reduce the pres-
sure on the drill bit. After you have cut through the reinforcement, you can
increase the pressure on the drill bit again.
Drill bit extension
If you need to drill deeper than the effective length of your drill bit:
• First, only drill as far as the effective length of the bit allows.
• Remove the bit and release the drill core from the hole without moving
the core drilling rig.
• Push the bit back into the drill hole.
Screw a suitable extension between the drill bit and the motor. If the drill
bit adapter is 1¼’, do not forget the copper rings to make it easier to loo-
sen the drill bit.
Bekijk gratis de handleiding van Eibenstock DBE 250 R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Eibenstock |
Model | DBE 250 R |
Categorie | Niet gecategoriseerd |
Taal | Nederlands |
Grootte | 37245 MB |