Eibenstock DBE 250 R handleiding
Handleiding
Je bekijkt pagina 20 van 256
20
After an interruption of your work, only switch the machine on again
after having checked that the drill bit can be turned freely.
The tool may be used with the drill rig only.
Do not touch rotating parts.
Persons under 16 years of age are not allowed to use the tool.
During use, the user and other persons standing nearby have to wear
suitable ear protectors, goggles, helmets, protective gloves and boots.
Always work concentrated and carefully. Do not use the tool when
you are lacking in concentration.
For further safety instructions, please refer to the enclosure!
Fixing to Drill Rig
79,5
98
41,3
10
M
8
x
1
6
The EBM 250/2 RP is attached to the
drill stand at the base of the gearbox
using 4 M8 hexagon socket head
screws. Only insert the machine into a
stable drill stand that is equipped with
precise guides and ensure that the
machine axis is aligned parallel to the
drill stand column. Only use drill stands
that are sufficiently stable. The use of a
water collection ring is recommended.
Electrical Connection
The EBM 250/2 RP is designed in protection class I.
To protect the operator, the machine may only be ope-
rated if a residual current device is available. For this
reason, the device is supplied with a residual current
circuit breaker (PRCD) integrated in the cable as stan-
dard.
Attention!
The PRCD-safety switch must not lay in water.
PRCD-safety switch must not be used to switch the
tool on and off.
Before you start working, check the proper function-
ing by pressing the TEST button.
Bekijk gratis de handleiding van Eibenstock DBE 250 R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eibenstock |
| Model | DBE 250 R |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 37245 MB |
