Eibenstock DBE 250 R handleiding
Handleiding
Je bekijkt pagina 19 van 256
19
Safety Instructions
Safe work with the machine is only possible if you read
this operating instruction and follow the instructions
contained strictly.
Additionally, the general safety instructions of the leaf-
let supplied with the tool must be observed. Prior to the
first use, the user should absolve a practical training.
Save all warnings and instructions for future reference.
If the mains cable gets damaged or cut during use, do
not touch it, but instantly pull the plug out of the sock-
et. Never use the tool with a damaged mains cable.
When drilling in ceilings or walls make sure you will not
cut through electrical mains, gas or water pipes. Use
metal detection systems if needed.
Prior to the start of your work, consult a statics special-
ist to determine the exact drilling position.
If drilling through ceilings, secure the place below, be-
cause the core may fall downward.
Pay attention that the tool is not exposed to direct rain.
Do not use the tool in an environment with danger of explosion.
Do not use the tool standing on a ladder.
Do not drill in asbestos-containing materials.
Never carry the tool at its cable and always check the tool, cable and
plug before use. Have damages only repaired by specialists. Insert the
plug into the socket only when the tool switch is off.
Modifications of the tool are prohibited.
The machine should only work under supervision of sbd. Plug and
switch the machine off if it is not under supervision, e.g. in case of put-
ting up and stripping down the machine, in case of voltage drop or
when fixing or mounting an accessory.
Switch the machine off if it stops for whatever reason. You avoid that it
starts suddenly and not under supervision.
Do not use the machine if a part of the housing is damaged or in case
of damages on the switch, the cable or plug.
During work, always lead the mains cable, extension cable and extrac-
tion hose to the back away from the machine.
Power tools have to be inspected visually by a specialist in regular in-
tervals.
When using the drill, cooling water is never allowed to get into the
motor and all electrical parts.
Overhead-drillings only with suitable safety measures (water collection).
Bekijk gratis de handleiding van Eibenstock DBE 250 R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eibenstock |
| Model | DBE 250 R |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 37245 MB |
