Eibenstock BST 352 V handleiding
Handleiding
Je bekijkt pagina 21 van 112
21
Behavior by Malfunction
Turn off the machine by malfunction and disconnect from the
electricity network. Operations on the electrical system of the
machine can be executed only by a specialist.
Trouble Shooting
Error
Possible cause
Solution
Drilling unit has
play
(vibration)
The stand has become
loose.
Tighten wing nut
Lead has too much play
Adjust guide
Sliding balls worn
Replace slide balls
Warranty
According to the general supply conditions for business dealings, suppliers
have to provide to companies a warranty period of 12 months for redhibitory
defects. (to be documented by invoice or delivery note)
Damage due to natural wear, overstressing or improper handling are
excluded from this warranty.
Damages due to material defects or production faults shall be eliminated
free of charge by either repair or replacement.
Complaints will be accepted only if the tool is returned in non-dismantled
condition to the manufacturer or an authorized Eibenstock service centre.
EU - Declaration of Conformity
It is necessary that the machine (f. e. EBM 352/3) used in this drill rig com-
ply with the requirements which are described in the specifications of the
drill rig (f. e. drilling diameter, fixture of the motor).
We declare that this unit has been designed in compliance with 2006/42/EC.
This unit must not be put into service until it was established that the Power
Tool to be connected to this unit is in compliance with 2006/42/EC (identified
by the CE-marking on the Power Tool).
Elektrowerkzeuge GmbH Eibenstock
Lothar Lässig
02.07.2025
Bekijk gratis de handleiding van Eibenstock BST 352 V, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eibenstock |
| Model | BST 352 V |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 20311 MB |
