Eibenstock BST 352 V handleiding
Handleiding
Je bekijkt pagina 15 van 112
15
Attaching the feed lever
▪ Attach the turnstile (1) to the
left or right of the carriage (2).
This depends on the work to
be carried out.
▪ Please check that the turnstile
(1) is correctly positioned.
Fastening of the Drill Rig
Hole centering indicator:
The drill rig is fitted with a hole centering indicator for easy and precise posi-
tioning.
▪ Markieren Sie die Mitte der zu erstel-
lenden Bohrung.
▪ Klappen Sie den Bohrlochmittenanzei-
ger bis zum Anschlag aus (siehe Abb.).
▪ Positionieren Sie den Bohrständer so,
dass die Spitze des Anzeigers genau
auf die Markierung der Bohrlochmitte
zeigt.
▪ Nachdem der Bohrständer fest mon-
tiert ist, klappen Sie den Bohrlochmit-
tenanzeiger wieder ein.
Fastening with dowels in concrete
To fasten the drill stand with dowels, it is necessary to remove the vacuum
grip and the foot seal from the base plate.
▪ Mark the position of the mounting hole on
the surface to be drilled.
▪ Drill the hole (Ø 16) 50 mm deep (A) into
which the M12 dowel (B) is to be inser-
ted; insert the dowel and expand it with
the dowel setting tool (C).
▪ Screw the quick-release screw (D) into
the dowel.
Masonry anchors must be used
for masonry.
▪ Set up the stand.
Bekijk gratis de handleiding van Eibenstock BST 352 V, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eibenstock |
| Model | BST 352 V |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 20311 MB |
