Handleiding
Je bekijkt pagina 12 van 23
12
Installing the Sealing Strips
To install the sealing strips:
1. Make sure the leveling legs are properly installed and that the unit is level.
2. Using two or more people, carefully place the commercial refrigerator on its back.
3. Remove a sealing strip from the packaging.
4. Place the sealing strip on the bottom of the unit around the leveling legs.
5.Makesurethatthesealingstripisfullyinstalledandushwiththebottomoftherefrigerator.
6. Repeat steps 3-5 for the remaining sealing strips.
7. Carefully return the refrigerator to its original upright position.
8. Using a carpenter’s level, ensure that the refrigerator is still level.
Warning: Use two or more people to move and install the commercial refrigerator. Failure
to do so can result in back or other injury.
!
Right /Left sealing strip
Front /Back sealing strip
Four (4) sealing strips have been included with the commercial refrigerator. Two (2) for the front/
back, and two (2) for the right/left. Once the sealing strips are fully installed they will create a
barrierbetweenthebottomofthecommercialrefrigeratorandtheoorthatwillhelpprevent
dirt, debris, and other contaminenets from getting under the refrigerator.
Note: The size of the sealing strips may vary. When installing the sealing strips, please
safely remove any excess material, with scissors or a similar cutting tool, so that the
sealing strips match the underside of the refrigerator.
Warning: Take care when removing the excess material from the sealing strips. Improper
use of a cutting tool can result in injury.
!
Bekijk gratis de handleiding van Edgestar VBM91SS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Edgestar |
| Model | VBM91SS |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 2108 MB |
