Handleiding
Je bekijkt pagina 13 van 60
11
EN
Operation
WARNING!
Before plugging in and starting the speaker system, make sure that all controls
are turned off or set to a low level.
NOTE:
• You can use the speaker while it is charging but if the battery is too low, the
speaker performance might be poor. Using a low volume setting will help to
improve the sound.
•
To ensure excellent sound quality, we recommend that you disconnect the
charging cable from the speaker once charging is complete.
Playing music
1.
Press and hold the button to turn on the speaker. A sound prompt will play and the
LED lights will turn on.
2. Setup your connection (as detailed above).
NOTE: If the unit is not used for 15 minutes, it will go into standby mode and the
LED lights will turn off. Press and hold the switch on the speaker to turn the
unit on again.
3. Connect to your audio source as described in the Connections section.
4. To select the playback source, press the button repeatedly: BT, FM, TF, USB or LINE
(AUX). A melody will play each time you enter a new mode.
NOTE:
•
When you connect a USB memory stick or TF card, the speaker will immediately
enter this mode and start to play the music.
•
Make sure the volume is turned up on both the speaker and the external
device it is connected to.
5.
To control playback of the audio, you can either use your external device’s controls (if
available), or you can use the following buttons on the speaker:
Button Mode Action
Bluetooth/TF/USB Press to play or pause the track or file.
LINE (AUX)
Press to mute the sound. Press again to
unmute the sound.
Product usage
B
Bekijk gratis de handleiding van Edenwood PARTY 250, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Edenwood |
| Model | PARTY 250 |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 4394 MB |
