Handleiding
Je bekijkt pagina 81 van 140
English - 79 -
In Headphone with Speakers mode, the TV speaker
volume can be adjusted by the remote. The volume
of the headphones can be adjusted in Headphone
Volume menu on screen.
SoundBar Settings
When a soundbar device is connected to the TV, you
can change the Sound Bar Settings via the Settings
menu for best device audio quality.
When an ARC device is connected to the TV, the sound
output is automatically switched to ARC. If the user
switches to other sound output channels, the soundbar
menu cannot be adjusted but the sound menu of TV
can be adjusted.
Press the Home button on your remote control and
select Settings>Sound>Sound Bar Settings.
When you connect a soundbar with a HDMI cable,
you should Set CEC Control to On by pressing the
Home button on your remote control, then select
Settings>System>HDMI & CEC>CEC Control.
EQ Modes: You can select Music, Movie, News,
Sport, Night.
Surround Modes: You can set to On to turn on the
Surround Modes.
Bass Level/Treble Level/Dimmer Level: You can
adjust Bass Level/Treble Level/Dimmer Level
Reset: Reset current Sound Bar Settings to factory
mode.
Note:
• Thisfunction is only applicablefor the specic soundbar
types.
Network
You can get access to the Internet through your TV.
Check the Internet Connection Status
Press the Home button on your remote control and
select Settings>Network>Internet Connection.
Test the current network connection status and view
the current network information.
Connection Test
Press the Home button on your remote control and
select Settings>Network>Internet Connection>-
Connection Test.
Start a network connection test.
Network Information
Press the Home button on your remote control and select
Settings>Network>Internet Connection>Network
Information.
View information about your network connection.
Turn on the TV through the Internet
Wake on Cast
Press the Home button on your remote control and
select Settings>Network>Wake on Cast.
You can enable or disable Wake on Cast function
which is able to remotely wake up the TV through
external devices.
Note:
• This function may not be applicable in some models/
countries/regions.
• Enabling this function may result in higher energy
consumption.
Wake on Wireless Network
Press the Home button on your remote control and se-
lect Settings>Network>Wake on Wireless Network.
With a wireless network connection and enabling Wake
on Wireless Network, you can switch on the TV from
standby and push content to be viewed on the TV with a
mobile device App supporting the screencast function.
Note:
• To use this function, make sure your TV and mobile device
are connected to the same network environment.
• Enabling this function may result in higher energy
consumption.
• This function may not be applicable in some models/
countries/regions.
Wake on LAN
Press the Home button on your remote control and
select Settings>Network>Wake on LAN.
With a wired Ethernet connection and enabling Wake
on LAN, you can switch on the TV from standby and
push content to be viewed on the TV with a mobile
device App supporting the screencast function.
Note:
• To use this function, make sure your TV and mobile device
are connected to the same network environment.
• Enabling this function may result in higher energy
consumption.
• This function may not be applicable in some models/
countries/regions.General
You can set up system settings.
Note:
• The menus displayed vary depending on models/countries/
regions.
Set Time
Press the Home button on your remote control and
select Settings>System>Time.
Set the current time based on your location.
Time Format: Set the time display to be 12 or 24-
hour format.
Bekijk gratis de handleiding van Edenwood ED50A06UHD-VE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Edenwood |
| Model | ED50A06UHD-VE |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 18571 MB |
