Handleiding
Je bekijkt pagina 80 van 140
English - 78 -
This function may not be applicable in some models/
countries/regions.
Wall Mount Setup: Automatically optimise the sound
based on the position of the TV.
This function may not be applicable in some models/
countries/regions.
Auto Volume Control: Activate to prevent the volume
from changing when switching TV channels.
This function may not be applicable in some models/
countries/regions.
Reset Current Mode: Restore all of the audio settings
in the current audio mode to the factory default values.
Note:
• Some models may not support decoding of DTS CD
bitstreams. Playback of this format may produce undesirable
noise.
Select Speakers
Press the Home button on your remote control and
select Settings>Sound>Speakers.
Adjust the settings of speakers.
Audio Output
Select the speakers which you want to use.
Digital Audio Output
Select the digital audio output format that best suits
the audio device type.
Auto: the audio device automatically outputs in a
supported format.
Pass Through: the audio device outputs without any
processing.
PCM: the audio device outputs PCM (pulse code
modulation) format.
Dolby Audio - Dolby Digital: the audio device outputs
Dolby Digital audio when connected to the TV via the
coaxial port.
Dolby Audio - Dolby Digital Plus: the audio device
outputs Dolby Digital Plus audio when connected to
the TV via the HDMI (ARC/eARC) port.
Note:
• This function is only applicable when Home>Settings>Sound
>Speakers>Audio Output is set to ARC or SPDIF Only.
• When external audio devices are connected to the TV
via coaxial, PCM and Dolby Audio - Dolby Digital are
recommended.
Digital Audio Delay
Adjust the digital audio output delay time to sync audio
from an external speaker with the images on the TV.
Note:
• This function is only applicable when Home>Settings>
Sound>Speakers>Audio Output is set to ARC or SPDIF
Only.
Lip Sync
Synchronise the video and audio.
Note:
• This function may not be applicable in some Audio Output
modes.
Balance
Adjust the left and right speaker level to optimise audio
for a specic location.
Note:
• This function may not be applicable in some Audio Output
modes.
eARC
Connect an audio device that supports eARC via
HDMI (eARC) and set eARC to On to enjoy higher
sound quality. This feature is available to set when
Home>Settings>Sound>Speakers>Audio Output
is set to ARC.
Note:
• This function may not be applicable in some models/
countries/regions.
Headphone Settings Setup
Press the Home button on your remote control and
select Settings>Sound>Headphone.
Set the sound output mode through headphones.
After connecting your wired headphones, or other
external audio ampliers, you can set up your TV to
your preference.
Note:
• This function may not be applicable in some models/
countries/regions.
Headphone Mode
Change Headphone audio settings.
Headphone Only, the TV speakers will be muted when
the headphones are being used. Any other connected
audio devices will also be muted when headphones
are in use.
Headphone with Speakers, the TV speakers,
headphones and other connected audio devices will
have audio output.
Audio Out with Speakers, the TV speakers and
headphones will have audio output simultaneously, and
the volume can be adjusted simultaneously.
Note:
• When you set built-in speakers and headphones to have
audio output at the same time, the sound eectof the
speakers may change.
Headphone Volume
Independently adjust the volume of the headphones.
In Headphone Only mode, you can adjust the volume
by the remote or in Headphone Volume menu on
screen.
Bekijk gratis de handleiding van Edenwood ED50A06UHD-VE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Edenwood |
| Model | ED50A06UHD-VE |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 18571 MB |
