Ecoteck Libera handleiding
Handleiding
Je bekijkt pagina 36 van 48
Use and maintenance manual, model “LIBERA 8 V/C - LIBERA 11 V/C”
ENGLISH
36
16 ALERTS OVERVIEW
PELLETS
PHASE DESCRIPTION
ALARM
Something has triggered and alarm.
Consult the “ALARMS” Chapter for
further details.
PELLET ANOMALY
The appliance signals an anomaly
without switching off. See “ANOMALY
OVERVIEW”
The batteries of the remote control
are running low.
Flat batteries. REPLACE THEM AS SOON
AS POSSIBLE TO AVOID DAMAGE TO
THE REMOTE CONTROL.
The service-hour limit has been
reached. You are advised to request
extraordinary maintenance of the
appliance by authorised staff.
WOOD
PHASE DESCRIPTION
FIREWOOD ANOMALY
The lever on top of the product has
been switched to WOOD MODE
when the product was operating in
PELLET MODE; operation not allowed.
Press OK to display the message
explaining the anomaly, then press
OK once again to access the menu.
WOOD MODE ON
Somebody pressed the PELLET MODE
ignition key on the remote control
while the upper lever was set on
WOOD MODE. operation not allowed.
PHASE DESCRIPTION
The system has detected a ame
developing in the combustion
chamber with the upper lever set
on PELLET MODE. This is a notication
to tell the user to switch the lever to
WOOD MODE.
17 ANOMALY OVERVIEW
PELLETS
PHASE DESCRIPTION
FAULTY PRESSURE
SENSOR
The product signals a malfunctioning
of the combustion sensor. For
safety reasons, the stove switches
to eco mode while waiting for the
technician.
HOT SMOKE
The maximum smoke temperature
threshold has been reached; the
appliance will switch to eco mode
with ventilation at maximum power
to cool down.
EXCESSIVE LOAD
If the quantity of pellet is high for the
power of the machine. In P/A Ratio,
reduce the pellet load by acting on
the % (see dedicated paragraph).
FAULTY FLAME-
READING PROBE
The product signals a fault to the
probe that detects the ame
temperature. For safety reasons, the
stove switches to eco mode while
waiting for the technician.
PELLETS and WOOD
PHASE DESCRIPTION
When the user moves the wood-air
adjustment lever, the auger stops
loading pellets into the brazier and
the stove signals the anomaly with
an acoustic signal. Lift the lever to
restore normal operation. Otherwise,
the product will trigger an alarm.
Bekijk gratis de handleiding van Ecoteck Libera, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ecoteck |
| Model | Libera |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9584 MB |
