Ecoteck Libera handleiding
Handleiding
Je bekijkt pagina 31 van 48
Use and maintenance manual, model “LIBERA 8 V/C - LIBERA 11 V/C”
ENGLISH
31
At the end of the loading operation the display
will return to the USER SETTINGS menu.
12.4 PELLET/AIR INTAKE RATIO
PELLET/AIR RPM
This function allows you to safely vary the
percentage of pellets loaded into the brazier
during operation and/or change the quantity
of combustion air introduced through the
appropriate inlet, usually located on the back of
the product.
To improve combustion, if necessary, it is
recommended to increase or decrease the
quantity of combustion air as needed. If this is not
enough, then it will also be necessary to change
the pellet load.
The variation directly affects the values stored
in the electronic system. The user can control
these values in full transparency. These values are
obtained using a DIN Plus certied pellet. If you
use a different type of pellets, it may be necessary
to use this function to optimize combustion.
OPERATING PROCEDURE:
menu > user settings > p/a ratio
Press OK to access the menu.
Scroll the items up to USER SETTINGS, key ↓
Press OK to access the menu.
Scroll the items up to P/A RATIO, then press OK
Press ↑↓ to change the pellet load.
The values vary from -5: reduction in pellet load in %
to +5: pellet load increase in %
Press OK to conrm and move to
the air intake settings.
Press ↑↓ to change the air intake.
The values vary from -5: reduction in pellet load in %
to +5: pellet load increase in %
Press OK to conrm. The screen will automatically go
back to the USER SETTINGS screen.
Pay particular attention when changing the
values in this menu, as the product can be severely
damaged.
The example above shows a % decrease of -2
PELLETS and +3 AIR;
such a setting derives from a lack of oxygen in the
combustion chamber and by the fact that the
pellet size is 2 cm smaller than the average.
12.5 STOVE STATUS
In the stove status menu, it is possible to view a
series of information on the operation of the
appliance, e.g., operation values, the main
motors’ RPMs, and operating temperatures.
Moreover, if the Wi-Fi module is connected to the
stove, you can also check the operating status of
the module and its management system; see the
Wi-Fi manual for further details on these two items.
This menu is mainly designed for the technical
assistance service.
OPERATING PROCEDURE:
menu > user settings > stove status
Press OK to access the menu.
Scroll the items up to USER SETTING, key ↓
Press OK to access the menu.
Scroll the items up to STOVE STATUS, key ↓
Press OK to access the menu.
Press ↑↓ to select the type of screen you want to
display
Press OK to access the submenus.
12.6 ENABLE EXTERNAL THERMOSTAT
The following paragraph explains how to activate
Bekijk gratis de handleiding van Ecoteck Libera, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ecoteck |
| Model | Libera |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9584 MB |
