Ecoteck Libera handleiding

Handleiding

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748/ 48

Afdrukken

Je bekijkt pagina 29 van 48

Use and maintenance manual, model “LIBERA 8 V/C - LIBERA 11 V/C”

ENGLISH

29

the airow. The combustion rate (and, therefore,

the thermal power generated) is regulated both

by the quantity of rewood in the combustion

chamber and the amount of air. When the ame

burns too fast, it will shorten rewood wood

burn time, thus lowering the performance of the

product. Therefore, during operation, combustion

adjustments must be carried out by acting on the

air handle gradually.

g.1

g.2

Maximum performance can be obtained by

loading two 330 mm logs of beech wood for

a total weight of 1.8 kg and setting the stove

accordingly. The air adjustment lever for wood-

burning operation must be set as illustrated in g.2

Combustion is efcient and “clean” when the

ame looks pale yellow. If the ame tends

towards red, or if you notice black smoke in the

combustion chamber, turn the lever upwards to

slightly increase air intake.

To learn how to adjust combustion correctly, an

initial period of use is required.

To avoid the ame to backre towards the user

and the surrounding environment, do not open

the door suddenly. Carry out the operation slowly

and with due caution: risk of re or burns.

Using heat protectors, carefully load the wood

into the hearth. Avoid slamming violently the

logs against the refractory panel that lines the

combustion chamber, so as not to break it.

Keep a reproof glove and some rewood stored

in a log holder next to the product to ease and

speed up loading operations.

When fuel is added above the embers in the

absence of ame, a large amount of smoke could

develop. In such event, an explosive mixture of

gas and air could form which - in extreme cases

- could result in an explosion. For safety reasons, it

is advisable to carry out a new ignition procedure

using small strips.

12 USER SETTINGS

This chapter illustrates the functions best operate

the product and get the most out of it.

12.1 VENTILATION MANAGEMENT

NOBIS’ products, both hermetic and natural-

convection stoves, guarantee a great heating

experience, and in total absence of noise, as they

work without forced ventilation.

This allows maximum exibility of use: the stove can

work at a xed speed (from 1 to 7 regardless of the

stove power) or linked to the stove power, chosen

with the remote control (PS) or deactivated (0

zero).

OPERATING PROCEDURE:

menu > user settings > ventilation

Press OK to access the menu.

Scroll the items up to USER SETTING, key ↓

Press OK to access the menu.

Press OK on the rst menu item, "VENTILATION"

The screen with the settings will appear as in the

gure below.

Press ↑↓ to make changes:

0 - deactivated, natural convection only

1 - 7 - always active at xed speed

PS - activated, following the stove power

(SP = stove power)

Press OK to conrm.

To return to the STAND-BY screen, use the

← key, repeating the operation several times.

In WOOD mode, the operation relating to

ventilation does not change.

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748/ 48

Bekijk gratis de handleiding van Ecoteck Libera, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Gerelateerde producten van Ecoteck (Niet gecategoriseerd)

Handleiding bekijken

Ecoteck Unica

Niet gecategoriseerd - handleiding

Andere merken in Niet gecategoriseerd