Ecoteck Libera handleiding
Handleiding
Je bekijkt pagina 24 van 48
Use and maintenance manual, model “LIBERA 8 V/C - LIBERA 11 V/C”
ENGLISH
24
the time needed to reach the desired temperature
where the product is installed.
From the STAND-BY screen, press ↑ to change the
values.
Values range from 1 to 7. They are represented by
black boxes visible below room temperature.
Press ↑↓ to make changes.
Press OK to conrm, or wait 3 seconds for
automatic conrmation.
10 PELLET MODE
This chapter highlights a series of operations to
be carried out when switching on and using the
appliance with pellet fuel. Insert the lever into its
housing, to be found on the top of the product,
and push it forward (“Pellet mode”) as shown in
the gure below:
10.1 PELLET-MODE PRODUCT SWITCH-ON/OFF
To turn on the product, hold the button pressed
until you will see the screen below, followed by an
acoustic signal.
Once the mechanical cleaning process of the
brazier has been completed, the stove begins the
actual ignition phase.
The display will show the following screen during
the phases below:
IGNITION - Initial pellet-loading phase.
WAITING FLAME - Flame-development waiting time.
FLAME PHASE - Flame-stabilization phase. Initial
load has been completed.
If a ame-shaped icon with the wording ON
appears on-screen without indicating the working
power, it means that the stove is in one of these 3
phases. Subsequently, the stove will start working
and the power level will be highlighted on-screen
as well. The following example, the operating
power is set to level 7.
To TURN OFF the stove, simply keep the button
pressed for a few seconds: the stove will carry
out the nal cleaning (the start of the operation
is accompanied by an acoustic signal) and will
cool down before switching OFF. The following
gures show the nal cleaning and the OFF status.
When the product is switched on for the rst time,
unpleasant odours or fumes may be generated
due to the evaporation or drying of some of the
materials used. Such phenomenon will disappear
after a few hours of use. During this period, it is
advisable to keep the premises well ventilated.
10.2 FUNCTIONING (PELLET MODE)
Like all other Nobis’ pellet products, this product
has 7 operating powers. The power level is
represented by 7 black squares which are
displayed below room temperature.
Below you can nd the behaviour of the appliance
once room temperature has been reached as
per settings.
10.3 ECO MODE
During operation, the appliance works with the
aim of reaching the room temperature as per
settings. When this condition has been met, the
power is reduced until entering into ECO MODE,
a phase in which the supply of combustion air is
Bekijk gratis de handleiding van Ecoteck Libera, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ecoteck |
| Model | Libera |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9584 MB |
