Ecoteck Libera handleiding
Handleiding
Je bekijkt pagina 13 van 48
Use and maintenance manual, model “LIBERA 8 V/C - LIBERA 11 V/C”
ENGLISH
13
• a detailed description (also including photographs)
of the presence of other heat generators;
• Declaration of Conformity of the system to
standard (M.D. 37/08);
• general description, or diagram, or photographic
documentation of the changes made to the
system, if intervention was necessary during
installation;
• Use of certied material with the CE mark
(305/2011);
• any other relevant information useful for warranty
purposes;
• date and signature of the installation technician;
NOBIS SRL declines all responsibility in the event
of non-compliance with any standard for the
installation and commissioning of its products.
3.9 UNPACKING THE PRODUCT
The packaging is composed of boxes in recyclable
cardboard, according to RESY standards, and
wooden pallets. All packaging materials can be
re-used for similar use or, if necessary, disposed of
as urban waste, in compliance with legislation in
force.
Cut the strap binding the pallet to the packaging
and lift the cardboard; remove the plastic bag
around the product, ensuring it is intact.
The body must always be moved in a vertical
position using trolleys.
Pay particular attention
so that the door and
its glass are protected
against mechanical
impacts which would
compromise their
integrity.
If possible, unpack the
product near the area
where it will be installed.
To remove the
appliance from the
pallet, unscrew the
metal supports holding
it, so as to release it from
the wooden base.
Place the appliance and connect it to the ue
pipe. Install the 4 adjustable feet and adjust
them to match the smoke outlet with the pipe.
Remember that the nishing frame must also be
installed. Therefore, make sure to calculate the
space accordingly.
3.10
ASSEMBLY OF THRE FUME EXHAUST/DUCTING
Below you will find the instructions for proper
installation of the smoke outlet. In this chapter
you will also find the installation instruction for
the optional ducting kit, as well as a diagram for
disassembling (and reassembling) the appliance
covering to place the kit correctly.
This chapter also deals with non-standard
installation options. Pipes for non-standard
installations are not provided and have to be
purchased from your trusted dealer/assistance
centre.
The installation, disassembly / reassembly of
the appliance must be carried out by qualied
personnel authorized by Nobis Srl.
Please note that opening the appliance by
unauthorized personnel will invalidate the product
warranty.
CONNECTION TO THE SMOKE EXHAUST SYSTEM
Insert the rst section of the Ø130 mm smoke duct,
which must be made of high-quality material
and resistant to the high temperatures to which
it could be subjected in wood-burning operation.
Bekijk gratis de handleiding van Ecoteck Libera, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ecoteck |
| Model | Libera |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9584 MB |
