Ecler WiLD-TX handleiding
Handleiding
Je bekijkt pagina 24 van 41
24
PRECAUTIONS
WARRANTY
&
ENVIRONMENT
DESCRIPTION
&
FEATURES
WiLD DECT
TECHNOLOGY
INSTALL
&
CONNECT
PAIRING &
STARTING UP
PACKAGE
CONTENTS
LED
INDICATORS
TECHNICAL
DATA
PANEL
FUNCTIONS
7.2 Bluetooth
®
Pairing Procedure
The Bluetooth
®
pairing procedure must be necessarily performed at least once to setup a
WiLD system. This should be done after the transmitter and all the receivers have been
physically installed and powered, and it is time to set up and run the installation
To pair the Bluetooth® device, follow these steps:
1. Short Press the button “BT pair” in the front panel of the WiLD-TX.
2. In the Bluetooth configuration of your smart telephone or PC look for the device with
name as “Wild-Tx XXXX” where “XXXX” will be a combination of letters and numbers.
3. Select the WilD-TX device in your Bluetooth configuration and accept the request.
4. Now the WiLD-TX device is paired to your Bluetooth device and ready to transmit audio.
Once there is one device paired to the WiLD-TX Bluetooth, no other devices will be able
to be paired until BT pair button is pressed.
To make a Bluetooth Reset hold the BT pair button for more than 5 seconds.
Bekijk gratis de handleiding van Ecler WiLD-TX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ecler |
| Model | WiLD-TX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6208 MB |
