Ecler WiLD-TX handleiding
Handleiding
Je bekijkt pagina 22 van 41
22
PRECAUTIONS
WARRANTY
&
ENVIRONMENT
DESCRIPTION
&
FEATURES
WiLD DECT
TECHNOLOGY
INSTALL
&
CONNECT
PAIRING &
STARTING UP
PACKAGE
CONTENTS
LED
INDICATORS
TECHNICAL
DATA
PANEL
FUNCTIONS
7. PAIRING & STARTING UP
When a WiLD-TX transmitter is powered up for the very first time (or after a Factory
Defaults reset has been applied to it), it will show the status LED blinking slowly.
This LED code means that the WiLD-TX unit is not paired to any WiLD-14 or WiLD-SB18
receiver unit, and it will be ready to be paired to a network of receivers.
Press the WiLD PAIR button on the rear panel to pair the transmitter with WiLD-14, and/or
WiLD-SB18 receivers; up to a maximum of 32 units.
The paring process is as follows:
1. Make a short press on WiLD PAIR button in the rear panel of the transmitter unit (WiLD-
TX).
2. The Discover process, or scan for available receivers, will start. Status LED indicator will
blink slowly during the time it takes to finish it (the full procedure can take several seconds
to finish completely). When the receivers have been paired to WiLD-TX, WiLD pair button
must be press in the rear panel to stop the pair mode in WiLD-TX.
3. Make a short press on WiLD PAIR button in the rear panel of the receiver units (WiLD-
14 and/or WiLD-SB18).
4. The Discover process, or scan for available transmitters, will start. Status LED indicator
will blink slowly during the time it takes to finish it (the full procedure can take several
seconds to finish completely).
Bekijk gratis de handleiding van Ecler WiLD-TX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ecler |
| Model | WiLD-TX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6208 MB |
