Ecler VEO-XTI2L handleiding
Handleiding
Je bekijkt pagina 23 van 85
23
9 CONFIGURATION USING ECLERNET MANAGER
VEO-XTI2L and VEO-XRI2L are devices that are compatible with EclerNet Manager. In
order to be able to start working with them in a project, all you need is the latest versions
of the management software and the firmware for these devices (from version v2.00r0).
Once these are connected to your installation’s network, as described in the
‘Commissioning’ chapter, you can start the configuration process.
9.1 How to find devices in EclerNet Manager
Start up the EclerNet Manager software and select the corresponding network card.
Then, open the "Online and Unused Device List" tab. The software will automatically
discover all the VEO-XTI2L and VEO-XRI2L devices present on the network and list them
in the window in question.
Note: only the elements that do not belong to an existing project will appear
In this way, you can easily discover which IP address belongs to each piece of equipment.
It is important to remember that the discovery process will show all the devices
connected to the network, regardless of whether they are within the same visible range
as the control computer or not. However, in order to configure and/or make use of them,
it will be essential that both the selected network card and these devices are within the
same network domain.
Bekijk gratis de handleiding van Ecler VEO-XTI2L, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ecler |
| Model | VEO-XTI2L |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18762 MB |
