Ecler VEO-XTI2L handleiding
Handleiding
Je bekijkt pagina 22 van 85
22
8.5 Video wall mode
When the VEO-XTI2L and VEO-XRI2L are to be used in video wall mode, both the
transmitters and the receivers must be configured as multicast devices. Each receiver
must be set to the same Group ID as the transmitter, following the instructions provided
in the ‘Configuring video wall mode using the control centre’ and ‘Configuring video wall
mode using the web interface’ chapters of this manual.
In a video wall type structure, configurations should not exceed the following:
• More than 253 transmitters
• More than 64 receivers (dimensions 8x8, 64x1, etc.)
Note: In a class B network, the total number of VEO devices (transmitters and
receivers) cannot exceed 65000 units.
Bekijk gratis de handleiding van Ecler VEO-XTI2L, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ecler |
| Model | VEO-XTI2L |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18762 MB |
