Ecler SAM412T handleiding
Handleiding
Je bekijkt pagina 7 van 15
7
Here is the wiring diagram for microphones:
Note: Microphones must be low impedance (200 to 600) and monophonic.
The SAM412T have a Phantom power supply for condenser microphones, individually
switchable by internal jumpers (for each microphone). Cf diagram.
Note: The Phantom power supply is activated by default (factory setting).
The Talkover function is activated when a signal presence is detected on Input 1. Then
it attenuates the other unit inputs. It can be activated/deactivated by the "TK" switch (2),
located on the front panel.
Given the important level differences between usual LINE and CD sources, the SAM412T
provides specialized inputs for each source. The sensitivity of the "LINE"(14) input is
0dBV (1V), while the "L LINE" (15) sensitivity is –5dBV (562mV). CD Players, DAT, MP3,
and DVD Audio should be connected to the "LINE" input. Tape players, tuners and some
production devices (samplers, sequencers) should be connected to the "L LINE" input.
WARNING: Turntables CAN NOT be directly connected to this unit, because SAM412T
has no RIAA preamp equipped input.
In addition, MIX IN (16) input directly access to the main mixing bus. It is especially useful
to connect a second SAM412T or another mixer in order to increase the number of mixing
channels and inputs.
Bekijk gratis de handleiding van Ecler SAM412T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ecler |
| Model | SAM412T |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1438 MB |
