Ecler MIMO88SG handleiding
Handleiding
Je bekijkt pagina 6 van 33
6
o Level control, mute, vu-meters and phase adjustment for inputs and
outputs.
o Internal signal generator (sine wave, pink noise, white noise, polarity test).
o Parametric EQ on inputs and outputs.
o Delay on inputs and outputs.
o Gate/compressor on input channels.
o Compressor/limiter on outputs.
o Input channel priority assignment (ducking).
o Virtual and physical messaging consoles (paging).
o Standard MIMO88SG / MIMO1212SG firmware version (for generic use)
and alternative version, for conferencing applications (MIMO88SG /
MIMO1212SG CONFERENCE version). Both firmware versions are
compatible with the MIMO88SG / MIMO1212SG hardware which can be
freely updated with anyone of them.
The MIMO SG programming is done with EclerNet Manager. Please refer to EclerNet
Manager Software manual at www.ecler.com for more information.
INSTALLATION
5.1. Location, assembly, ventilation
MIMO SG series has been especially designed to be installed in a standard 19" rack, taking
up 1U.
It is very important not to enclose the MIMO SG or expose it to extreme temperatures as
it generates heat. It’s also necessary to promote the passage of fresh air through the
ventilation holes of the chassis, leaving at least one rack unit off between each device and
installed above and below it in the rack frame.
If the setup has several amplifiers in the same rack or in a closed cabinet with doors, it is
highly recommended to supply them forced ventilation, installing fans at the upper and
lower ends. This upward air flow will help to dissipate the heat generated inside.
5.2. Connection to an AC outlet and switching on
All models in the MIMO SG series operate under voltages between 90 and 264 V at 47 to
63 Hz. This device features an over dimensioned power supply that adapts to the mains
voltage in any country of the world with no need to make any adjustments.
Bekijk gratis de handleiding van Ecler MIMO88SG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ecler |
| Model | MIMO88SG |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3412 MB |
