Ecler MIMO88SG handleiding
Handleiding
Je bekijkt pagina 23 van 33
23
The available messages are built with one or more fields separated with blank spaces (
= blank space):
<TYPE> [PARAM1] [PARAM2] [PARAM3] [PARAM4][LF]
The first field (TYPE) defines the message type and then, the required parameters for it
(each kind of message requires a given number of parameters). The field TYPE can have
these values:
• SYSTEM
• GET
• SET
• INC
• DEC
• SUBSCRIBE
• UNSUBSCRIBE
• DATA
• ERROR
At the end of this document you’ll find all the available messages and their parameters
for each model of the EclerNet compatible devices.
The SYSTEM, GET, SET, INC, DEC, SUBSCRIBE & UNSUBSCRIBE messages can be sent
from the client to the EclerNet device. The DATA & ERROR messages can be sent from
the device to the client. The only exception is the SYSTEM PING message, that is a
SYSTEM type message that is sent from the EclerNet device when the initial message
from the client to the device was SYSTEM CONNECT PINGPONG.
The communication (using UDP or RS-232) starts when a client sends the message
SYSTEM CONNECT to the EclerNet device. As far as the UDP communication requires
no connection (unlike the TCP), the EclerNet device stores this client’s IP address, and
then uses it as the destination IP address for the messages that it generates (DATA &
ERROR). After receiving the SYSTEM CONNECT message, the device dumps its entire
configuration using several consecutive DATA messages.
Note: if the configuration data dump process (usually a huge list of parameters & values)
wants to be avoided after a SYSTEM CONNECT message, a SYSTEM CONNECT ONCE
message can be used instead.
The communication can be terminated by two methods:
• Manually: when the client sends the SYSTEM DISCONNECT message, cancelling
all the subscriptions and stopping the DATA & ERROR messages
Bekijk gratis de handleiding van Ecler MIMO88SG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ecler |
| Model | MIMO88SG |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3412 MB |
