Ecler MIMO88 handleiding
Handleiding
Je bekijkt pagina 12 van 30
12
5.11 Front panel controls and LED indicators
The following elements are available on the MIMO88 front panel:
• MONITOR output (marked with a headphones symbol): it produces the same
monitoring signal already available via the rear panel screw terminal block, but here
on a ¼" TRS jack and with a rotary volume control (2 ) for listening through
headphones. It is especially useful for listening to input or output signals without
disturbing the normal operation. In 16x16 mode both MIMO units receive the same
signal. The monitored signal is selected with EclerNet Manager control software.
Please refer to the EclerNet Manager software manual at www.ecler.com for more
information.
• Input LED indicators: indicate the presence of audio signal at the unit’s input, and
its intensity level (green, amber and red indicate in this order the increased intensity
level)
• Output LED indicators: indicate the presence of audio signal at the unit’s output,
and its intensity level (green, amber and red indicate in this order the increased
intensity level)
• Status LED indicators (STATUS):
o DATA:
Off: there is no connection to EclerNet Manager even if connected
to Ethernet.
On: connected to EclerNet Manager or to other third party
application via TP-NET protocol. Flashing: data traffic with EclerNet
Manager or another application.
o LINK:
1. If the device is configured as 8x8 MASTER, the LED is
permanently off.
2. If the device is configured as 16x16 MASTER:
• If everything is correct (SLAVE is connected and there is no
communication error), the LED quickly and continuously
toggles between green (50ms) and unlit (50ms)
• If there is a communication error with the SLAVE, the LED
quickly toggles between green (50ms) and red (200ms)
• If no SLAVE is connected (or if connected equipment is
another MASTER), the LED slowly toggles between green
(800ms) and red (200ms)
3. If the device is configured as SLAVE:
• If everything is correct (MASTER is connected and there is
no communication error), the LED quickly and continuously
toggles between orange (50ms) and unlit (50ms)
Bekijk gratis de handleiding van Ecler MIMO88, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ecler |
| Model | MIMO88 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3164 MB |
