Ecler MIMO88 handleiding
Handleiding
Je bekijkt pagina 10 van 30
10
5.8 GPI Remote Control Ports
The rear panel of the MIMO88 offers 8 GPI inputs (16) for 0-10 VDC continuous control
voltage. Each of these inputs can be connected to an external physical device
(potentiometer, contact closure, continuously variable voltage 0-10V DC, etc.) and
assigned to a MIMO88 function, as for example:
• Input, output channel or matrix crosspoint volume remote control by means of a
WPaVOL physical knob or an Ecler WP Series WPaVOL-IR remote control
• MUTE or SOLO activation/deactivation by means of a switch or contact closure
• Recalling a preset with a push button or contact closure
GPI connectors are screw terminal blocks with three-contacts. The wiring is as follows:
Positive, + 12 VDC > Pin +
Variable voltage, 0-12 VDC > Pin ↑
Ground > Pin ⊥
WPaVOL connection to MIMO serial GPI ports
WPaVOL-SR connection to MIMO serial GPI ports
Jumpers position: ALOG / LIN
LIN position
+12 / +10 +12 position
Jumpers position: ALOG / LIN
LIN position
+12 / +10 +12 position
WPaVOL RJ45 pin 6 (+12VDC/+10VDC)
WPaVOL RJ45 pin 2 (Remote ZONE.)
WPaVOL RJ45 pin 1, 3 or 7 (GND)
WPaVOL-SR RJ45 pin 6 (+12VDC/+10VDC)
WPaVOL-SR RJ45 pin 2 (Remote VOL.)
WPaVOL-SR RJ45 pin 1, 3 or 7 (GND)
WPaVOL-SR RJ45 pin 8 (Remote VOL.)
WPaVOL-SR RJ45 pin 1, 3 or 7 (GND)
Bekijk gratis de handleiding van Ecler MIMO88, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ecler |
| Model | MIMO88 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3164 MB |
