Ecler ETH232AD handleiding
Handleiding
Je bekijkt pagina 14 van 17
14
Step 4: Open Ecler Net Manager and create a UCP panel. Add a new control page and
add a new control button (Net String) as follow:
Write the following command:
|TCP|192.168.0.232|5000|SET MUTE ON\n| ***
Or
|TCP|192.168.0.232|5000|SET MUTE OFF\n| ***
This command will send the CA-NET command “SET MUTE ON” to the ETH232AD
interface (with 192.168.0.232 IP address and listening port 5000).
The ETH232AD interface will “translate” the TCP command as a RS-232 serial
command, allowing enabling or disabling the mute function on the amplifier. The red LED
on the CA amplifier will switch ON or OFF offering a rapid response about the correct
communication.
With the same philosophy it will be possible to control any other RS-232 third party
device.
*** Note: If the device belongs to batch nº G1005 the IP address will be 192.168.1.100
Bekijk gratis de handleiding van Ecler ETH232AD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ecler |
| Model | ETH232AD |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2973 MB |
