ECG EDS 300763 BlackLine handleiding
Handleiding
Je bekijkt pagina 13 van 140

English
English
13
Water softener
Set the water softener manually using the rotary control of water hardness. The function of the water softener
is to remove from the water minerals and salts that could adversely aect the operation of the dishwasher. The
more minerals in it, the harder the water. The water softener can be adjusted according to the hardness level
of the water in your area. Your water supplier should provide you with information about your water hardness.
Setting the salt consumption
The dishwasher allows to regulate the consumption of salt depending on the hardness of the water used. Thus
can be the salt consumption optimized and regulated.
When regulating salt consumption, please do the following:
1. Close the door, switch on the appliance.
2. Within 60 seconds of switching on the appliance, press the P programme button for more than 5 seconds
to enter the water softener setting mode.
3. Press the programme button again to select the correct set for your local environment, the settings will
change in the following order: H1 -> H2 -> H3 -> H4 -> H5 -> H6.
4. To exit setup mode, press the z power button.
WATER HARDNESS SCALE
Level setting Salt consumption
German (dH) French (fH) British (Clarke) Mmol/l
0–5 0–9 0–6 0–0.94 H1 0
6–11 10–20 7–14 1.0–2.0 H2 9
12–17 21–30 15–21 2.1–3.0 H3 12
18–22 31–40 22–28 3.1–4.0 H4 20
23–34 41–60 29–42 4.1–6.0 H5 30
35–55 61–98 43–69 6.1–9.8 H6 60
1 °dH = 1.25 °Clarke = 1.78 °fH = 0.178 mmol/l
Factory settings: H3
Filling the polish dispenser
The polish is released during the nal phase of the program during polishing. This prevents forming drops on
the dishes, which would leave them with stains and smudges. Also, it speeds drying and water draining from
the dishes. Liquid polish is used in your dishwasher.
Use only brand name polishes for the dishwasher. Never ll the polish dispenser with any other
substances (e.g. dishwasher detergent, liquid detergent). You could damage the appliance.
Setting of polish dispenser:
In order to achieve a higher drying performance with a limited amount of polish, the dishwasher is designed
to adjust the consumption according to the user. Follow the steps below.
1. Close the door and switch on the appliance.
2. Within 60 seconds after step 1, press and hold the Program P button for at least 5 seconds, and then press
the delay start button (2) to enter setup mode.
3. Use the Program P button to select the desired settings in the following order: D1 -> D2 -> D3 -> D4 -> D5
-> D1. The higher the number, the more polish the dishwasher will use.
4. Press the z power button to complete the setup. The setting will also be saved after 5 seconds of no
activity.
When to replenish the polish
The regularity of the polish rell depends on the frequency of dishwashing and the setting used.
• If more polish is needed, the polish shortage indicator will light up ( ).
• Do not overll the polish dispenser
Bekijk gratis de handleiding van ECG EDS 300763 BlackLine, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | ECG |
Model | EDS 300763 BlackLine |
Categorie | Vaatwasser |
Taal | Nederlands |
Grootte | 13930 MB |