ECG EDS 300763 BlackLine handleiding

Handleiding

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140/ 140

Afdrukken

Je bekijkt pagina 12 van 140

English

English

12

USING THE DISHWASHER

1. Put salt in the softener, adjust the water hardness and add polish if necessary.

2. Prepare dishes and place them in the dishwasher.

3. Fill the dispenser with detergent.

4. Select the programme and start the dishwasher.

SALT INSERTION, WATER HARDNESS ADJUSTMENT AND POLISH

FILLING

Always use dishwasher-safe salt. The salt container is located under the bottom basket.

Warning:

• Use only salt which is safe to use in dishwashers! Other types of salts, which are not intended for

dishwashers, for example kitchen salt would damage the water softener. In case of damage caused by use

of improper salt the manufacturer does not keep warranty and is not responsible for any damage.

• Only ll the salt before starting the cycle. This will prevent salt grains released from the tray from collecting

on the bottom of the dishwasher for prolonged time, where they could cause a corrosion process.

When regulating salt consumption, please do the following:

1. Remove the bottom basket and unscrew the tank cap.

2. Insert a funnel (supplied) into the opening of the dispenser and pour into it about 1.5 kg of salt.

3. Rell the reservoir with water. A small amount of water usually overows from the dispenser.

4. After lling the container, screw the cap on tightly.

5. When the salt tank is full, the salt indicator light stops illuminating.

6. Immediately after lling the salt reservoirs, start a washing programme (we recommend the quick wash

programme). Failing to do so can lead to salt water damaging the lter system, pump or other important

component. In such case, the warranty shall be void.

Notes:

• Salt should be added when on the control panel the salt indicator ( ) lights up. As the salt dissolves

quickly, the salt indicator is lit even after the salt has been replenished. If there is no salt indicator on the

control panel (for some types), estimate the time of adding salt to the softener by the number of wash

cycles performed.

• If salt has spilled, run a rinse or quick programme to remove it.

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140/ 140

Bekijk gratis de handleiding van ECG EDS 300763 BlackLine, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Vaatwasser