Eaton Green Motion XCI000411 handleiding
Handleiding
Je bekijkt pagina 73 van 107
8.3.7 User authorization
The user authorization to start charging is granted to users using the local RFID card reader. This section describes the
authorization configuration.
8.3.7.1 Online mode
In online mode, the EV charger can be configured in Free mode (Plug and Start) with no authentication or with Authenticated
Users using the OCPP server for authentication. Users can use an RFID card or a dedicated mobile app linked to the server
for access.
Free
In Free mode (Plug and Start), users can start and stop charging without authentication.
a. No new charging session until reconnection
During disconnection, users are not allowed to start charging. No local authorization data is stored nor used.
b. Start charge with previously authorized RFID cards
During disconnection, the device uses authorization data available locally. Users previously authorized when the charging
station was connected will continue to be accepted and will be able to perform a charge. Other users will not be authorized
to charge. Once reconnected the charging station will synchronize the transaction with the Charging Station Management
System.
c. Start charge with unknown or previously authorized RFID cards
If the device is disconnected, the device uses locally available authorization data. Users previously authorized when the
charging station was connected and users whose authorization status is unknown are authorized to start charging. The
purpose here is to allow regular users to charge, with the risk being that this mode permits users without credit or without
any valid pass to perform a charge. Once reconnected the charging station will synchronize the transaction with the Charging
Station Management System.
The local authorization cache has a capacity to store up to 200 RFID cards. To clear this cache, utilize the Clear Authorization
Cache button.
Authenticated Users
Users need to authenticate with an RFID tag, used to query the authorization from the OCPP Charging Station Management
System.
Further configuration defines if the device shall store authorization data locally while connected and use that information when
temporarily disconnected from the OCPP Charging Station Management System.
73GREEN MOTION BUILDING INSTALLATION MANUAL MN191028EN April 2024 www.eaton.com
Bekijk gratis de handleiding van Eaton Green Motion XCI000411, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eaton |
| Model | Green Motion XCI000411 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16416 MB |
