Eaton Green Motion XCI000411 handleiding
Handleiding
Je bekijkt pagina 55 van 107

8.1.2 Connection via Wi-Fi hotspot
To connect to the EV charger via Wi-Fi hotspot, follow these steps:
Step 1. Turn the EV charger OFF and ON using the circuit breaker. Wait for the LED indicator on the EV charger to
turn green.
Step 2. Enable Wi-Fi on your phone, computer, or tablet, and search for available SSIDs.
Step 3. The EV charger will appear as GM_XXXXXX, where XXXXXX is the last six digits of the serial number.
Step 4. Each charger has a unique Wi-Fi hotspot password. The password is provided on the first page of quick start guide that
is included in the package. Password is provided in text and QR code format. The password should be stored safely for future
usage.
Step 5. Use the provided password to log in.
Step 6. Go to the address: http://192.168.53.1
If the fields are empty, try clearing your browser cache or verifying your Wi-Fi connection.
When connecting the EV charger via a Wi-Fi access point, the configuration session is active for 30 minutes.
After 30 minutes, the EV charger will need to be rebooted and reconnected to resume the configuration.
Figure 29. Connecting the EV charger via the Wi-Fi hotspot
You may see a warning message before you get to the configuration page. You can safely ignore this warning and
proceed further.
55GREEN MOTION BUILDING INSTALLATION MANUAL MN191028EN April 2024 www.eaton.com
Bekijk gratis de handleiding van Eaton Green Motion XCI000411, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Eaton |
Model | Green Motion XCI000411 |
Categorie | Niet gecategoriseerd |
Taal | Nederlands |
Grootte | 16416 MB |