Eaton Green Motion XCI000411 handleiding
Handleiding
Je bekijkt pagina 11 van 107
2.3 Protection from electric shock
2.4 Electromagnetic elds and interferences
2.5 Warning decals and rating plate
Electromagnetic fields may have harmful effects (unknown to date) on the health of people who are subjected to long exposure.
Avoid standing less than 20 cm from the equipment for long periods of time.
The labels on the equipment must NOT be removed, damaged, soiled or hidden. The labels must always
be visible and in good condition.
The technical data shown in this manual does not replace those shown on the data plates on
the equipment.
National standards related to grounding must be complied with.
Connect the unit’s external frame or other conductive parts to ground to ensure system protection and the highest
level of safety for the operators.
Professional and qualified personnel must be expert in the field and are therefore responsible for installing the
system in accordance with the manufacturer’s instructions and local legislation. If electromagnetic interferences are
detected, professional and qualified personnel should contact an Eaton technical
support representative.
2.6 Residual risks
Table 3. Residual risks
Risk assessment Recommended solution
Noise pollution caused by installations in unsuitable environments or where professionals
work on a regular basis.
Reassess the installation environment or site.
Unsuitable ventilation in the location, causing equipment to overheat and the discomfort of
people who are on the site.
Restore adequate ambient conditions and ventilate the site.
Protection from the elements such as water ingress, low temperatures, high humidity, etc. Maintain adequate ambient conditions for the equipment.
Do not obstruct openings on the equipment. Use suitable PPE or wait for the equipment to cool down before accessing it.
Dirt affects the system and prevents the safety labels from being read. Adequately clean the equipment, the labels and the workplace.
Installation done poorly. Request a training course.
During the installation stage, provisionally fixing the equipment or its components can
be hazardous.
Take care and restrict access to the installation area.
Accidentally disconnecting the quick connectors while the equipment is operational or
making incorrect connections can produce electric arcs.
Take care and restrict access to the installation area.
Despite the cautions and safety systems in place, some residual risks will still be present, which cannot
be removed. These risks are listed in the following table, along with recommendations to prevent or
mitigate them.
11GREEN MOTION BUILDING INSTALLATION MANUAL MN191028EN April 2024 www.eaton.com
Bekijk gratis de handleiding van Eaton Green Motion XCI000411, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eaton |
| Model | Green Motion XCI000411 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16416 MB |
